This page explains how to prepare your environment for running the bot.
Please consider using the prebuilt docker images to get started quickly while trying out freqtrade evaluating how it operates.
Click each one for install guide:
We also recommend a Telegram bot, which is optional but recommended.
The clock on the system running the bot must be accurate, synchronized to a NTP server frequently enough to avoid problems with communication to the exchanges.
Freqtrade provides the Linux/MacOS Easy Installation script to install all dependencies and help you configure the bot.
Windows installation is explained here.
The easiest way to install and run Freqtrade is to clone the bot Github repository and then run the Easy Installation script, if it's available for your platform.
When cloning the repository the default working branch has the name
develop. This branch contains all last features (can be considered as relatively stable, thanks to automated tests). The
stable branch contains the code of the last release (done usually once per month on an approximately one week old snapshot of the
develop branch to prevent packaging bugs, so potentially it's more stable).
Python3.6 or higher and the corresponding
pip are assumed to be available. The install-script will warn you and stop if that's not the case.
git is also needed to clone the Freqtrade repository.
This can be achieved with the following commands:
git clone https://github.com/freqtrade/freqtrade.git cd freqtrade # git checkout stable # Optional, see (1) ./setup.sh --install
(1) This command switches the cloned repository to the use of the
stable branch. It's not needed if you wish to stay on the
develop branch. You may later switch between branches at any time with the
git checkout stable/
git checkout develop commands.
Easy Installation Script (Linux/MacOS)¶
If you are on Debian, Ubuntu or MacOS Freqtrade provides the script to install, update, configure and reset the codebase of your bot.
$ ./setup.sh usage: -i,--install Install freqtrade from scratch -u,--update Command git pull to update. -r,--reset Hard reset your develop/stable branch. -c,--config Easy config generator (Will override your existing file).
With this option, the script will install the bot and most dependencies: You will need to have git and python3.6+ installed beforehand for this to work.
- Mandatory software as:
- Setup your virtualenv under
This option is a combination of installation tasks,
This option will pull the last version of your current branch and update your virtualenv. Run the script with this option periodically to update your bot.
This option will hard reset your branch (only if you are on either
develop) and recreate your virtualenv.
DEPRECATED - use
freqtrade new-config -c config.json instead.
Activate your virtual environment¶
Each time you open a new terminal, you must run
We've included/collected install instructions for Ubuntu 16.04, MacOS, and Windows. These are guidelines and your success may vary with other distros. OS Specific steps are listed first, the Common section below is necessary for all systems.
Python3.6 or higher and the corresponding pip are assumed to be available.
Install necessary dependencies¶
sudo apt-get update sudo apt-get install build-essential git
The following assumes the latest Raspbian Buster lite image from at least September 2019. This image comes with python3.7 preinstalled, making it easy to get freqtrade up and running.
Tested using a Raspberry Pi 3 with the Raspbian Buster lite image, all updates applied.
sudo apt-get install python3-venv libatlas-base-dev git clone https://github.com/freqtrade/freqtrade.git cd freqtrade bash setup.sh -i
Depending on your internet speed and the Raspberry Pi version, installation can take multiple hours to complete.
The above does not install hyperopt dependencies. To install these, please use
python3 -m pip install -e .[hyperopt].
We do not advise to run hyperopt on a Raspberry Pi, since this is a very resource-heavy operation, which should be done on powerful machine.
1. Install TA-Lib¶
Use the provided ta-lib installation script
This will use the ta-lib tar.gz included in this repository.
TA-Lib manual installation¶
Official webpage: https://mrjbq7.github.io/ta-lib/install.html
wget http://prdownloads.sourceforge.net/ta-lib/ta-lib-0.4.0-src.tar.gz tar xvzf ta-lib-0.4.0-src.tar.gz cd ta-lib sed -i.bak "s|0.00000001|0.000000000000000001 |g" src/ta_func/ta_utility.h ./configure --prefix=/usr/local make sudo make install cd .. rm -rf ./ta-lib*
An already downloaded version of ta-lib is included in the repository, as the sourceforge.net source seems to have problems frequently.
2. Setup your Python virtual environment (virtualenv)¶
This step is optional but strongly recommended to keep your system organized
python3 -m venv .env source .env/bin/activate
3. Install Freqtrade¶
Clone the git repository:
git clone https://github.com/freqtrade/freqtrade.git cd freqtrade git checkout stable
4. Install python dependencies¶
python3 -m pip install --upgrade pip python3 -m pip install -e .
5. Initialize the configuration¶
# Initialize the user_directory freqtrade create-userdir --userdir user_data/ # Create a new configuration file freqtrade new-config --config config.json
To edit the config please refer to Bot Configuration.
6. Run the Bot¶
If this is the first time you run the bot, ensure you are running it in Dry-run
"dry_run": true, otherwise it will start to buy and sell coins.
freqtrade trade -c config.json
7. (Optional) Post-installation Tasks¶
On Linux, as an optional post-installation task, you may wish to setup the bot to run as a
systemd service or configure it to send the log messages to the
journald daemons. See Advanced Logging for details.
Freqtrade can also be installed using Anaconda (or Miniconda).
This requires the ta-lib C-library to be installed first. See below.
conda env create -f environment.yml
MacOS installation error¶
Newer versions of MacOS may have installation failed with errors like
error: command 'g++' failed with exit status 1.
This error will require explicit installation of the SDK Headers, which are not installed by default in this version of MacOS. For MacOS 10.14, this can be accomplished with the below command.
If this file is inexistent, then you're probably on a different version of MacOS, so you may need to consult the internet for specific resolution details.
Now you have an environment ready, the next step is Bot Configuration.